Juggernaut 1000HP – Allison 1000 Transmission | Built By Inglewood Transmission

Juggernaut 1000HP – Allison 1000 Transmission | Built By Inglewood Transmission

LDP-COMPTRANS

There is a reason this transmission is called the Juggernaut. It is the Allison of all Allisons. It does not get any better PERIOD!!! This transmission was the first to the 5’s in the 1/8 mile and first to 8’s in the 1/4 mile and countless low 6-second 1/8 and 9-second 1/4 mile passes in multiple different trucks over the years. It still holds the fastest 1/8 mile and 1/4 mile Allison records. This isn’t a one-hit wonder like many others out there. Our proven combination is repeatable, and we’ve proved it is time and time again. If you want the end all be all of Allisons, look no further than the Juggernaut is it.

Availability: For local customers or customers wanting to have the installation done at Inglewood Transmission, it is $900 and we offer SAME DAY turnaround times to have your current transmission built. All you have to do is call or text 714-844-6611 and schedule an appointment and be here by 9:00 a.m, and you’ll drive home the same day with your new built transmission. The installation process includes hot flush, fluid, and transmission relearn.

LDP-COMPTRANS

$9,650.00

  • *YEAR

    *DRIVETRAIN TYPE

    *TORQUE CONVERTER

    *JUGGERNAUT JUICE ATF

    I ACKNOWLEDGE THAT A HOT FLUSH MUST BE COMPLETED PRIOR TO INSTALLING MY TRANSMISSION, ALONG WITH RECEIPT PROOF OF THAT HOT FLUSH


    *CORE CHARGE

    I UNDERSTAND THAT THIS PRODUCT CANNOT BE SHIPPED TO A RESIDENTIAL ADDRESS, COMMERCIAL SHIPPING ONLY.

Share:

Description

Inglewood Built Transmission Includes

– Billet Input/Output

– Billet C-2 Hub

– Billet P-2 Planetary

– Mixture of Raybestos and Alto Clutches

– New Bearings, Bushings, Seals and Gaskets

– Internal Harness

– Complete C1-C5 Frictions

– Bushings

– Parking Pawl Return Spring

– RatioTek pressure springs

– Custom Trim valve springs

– TransGo JR Shift Kit

– Custom fluid circuits

– Our in-house designed C3 clutch oiler

– PPE deep pan

– If you are unsure about which Torque Converter to choose, Call For Assistance – Allow 7-10 days for the product to ship from our facility.

LIFETIME WARRANTY INFO

Inglewood Transmission warrants components against defects in our workmanship and materials used in accordance with the terms and limitations below:

– The torque converter will only be warranted by the original manufacturer (Suncoast,Goerend, BD, etc.) and NOT by Inglewood Transmission.

– All claims related to defects in the torque converter shall be made directly with the product manufacturer and not with Inglewood Transmission.

– Inglewood Transmission does not warranty any failures due to or related to broken, sheared, fractured shafts, hard parts and/or cases; or any damage caused by broken shafts, hard parts, or cases.

– Inglewood transmission will not warranty any main cases, extension housings or bellhousings that have cracked or have been compromised if the damage is determined to be caused by the driveline.

– Inglewood Transmission will not warranty damage to Stock Enhanced, 525 or 750 horsepower transmissions if that damage was caused by exceeding the power capacity of that particular transmission (overpowering).

– Inglewood Transmission will not warranty any damages resulting from improper installation, negligence, alterations, accidents or improper use.

– If the vehicle’s transmission lines and transmission cooler were not hot flushed or replaced (including the radiator) prior to installation of the new unit it will not be covered under Inglewood Transmissions warranty.

– Inglewood Transmission will not provide warranty repair or service to any owner without properly documented maintenance records (provided by a qualified automotive service technician) that show all of the following:

1. Maintenance was performed at Inglewood Transmissions’s recommended intervals 0f 6000-10,000 miles using a Allison manufactured external filter (Spin on)

2. A internal filter (sump filter) and fluid change was performed at Inglewood transmission’s recommended interval of every 30,000 miles utilizing Allison components and recommended fluid. DEX 3 TranSynd, Cam 2 Synthetic, QuatraSyn, Royal Purple MAX, Schaeffer’s All-Trans. If a fluid to use is in question contact us at 714-844-6611

WARRANTY LIMITED TO REPAIR Inglewood Transmissions liability under this warranty is solely limited to repair or replacement of defective parts and/or workmanship. Inglewood Transmission shall not be liable for any incidental, special, or consequential, or punitive damages. 50% of freight cost and subsequent removal and reinstall labor charges not conducted inside Inglewood Transmissions facility are the consumers’ liability.

TRANSFER OF WARRANTY – This warranty is made to the original purchaser of the transmission and is tied to the VIN provided at time of purchase. The warranty may be transferred by the original purchaser if all of the following conditions are met:

– The new owner contacts Inglewood Transmission and makes a formal request to transfer the warranty;

– The request to transfer the warranty must be made within thirty (30) days of transfer of title of the vehicle. Proof will be required.

– Evidence of proper maintenance as set forth above is provided

– The payment of $500 to Inglewood upon satisfaction of all of the above, Inglewood transmission will issue a new warranty to the transferee, under the same terms and conditions as the previous owner.

HOW TO GET WARRANTY SERVICE If you need warranty service, please contact us at 714-844-6611 or email us at Sales@Inglewoodtransmission.com. You will need to provide us with the original invoice number, date of purchase, and reason for warranty claim. You are responsible for any expedited shipping if requested, and all risk of damage.

Reviews

There are no reviews yet.

Be the first to review “Juggernaut 1000HP – Allison 1000 Transmission | Built By Inglewood Transmission”

Your email address will not be published. Required fields are marked *

WHO IS THE TUNER/CALIBRATOR

PPEI, also known as Power Performance Enterprises, Inc., is led by the business owner and lead calibrator/tuner Kory Willis. PPEI began calibrating/tuning back in 2008, specializing in Diesel Performance but has since expanded into the Gas and Powersports industries. Kory and the team at PPEI have set many world records along with continuing many industry “firsts”. We take pride in knowing that Kory not only prides his work, but also thoroughly enjoys setting expectations high for our team so our customers can have the best products available in the world.